PURSUIT 2870 OFFSHORE Uživatelský manuál stáhnout pdf (Strana 54)

2870 OFFSHORE

6.2 High Pressure Washdown

A saltwater high pressure pump, controlled by a pressure sensor,

supplies the raw water hose connector located in the cockpit. The

pump is activated by the washdown switch located in the helm or

the rear of the cockpit. This switch should be turned to the “ON”

position just before using the washdown and be turned to the “OFF”

position when the washdown is not in use.

When activated, the pressure switch will automatically control the

pump. As the pressure builds in the washdown hose, the pump will

shut off. When the washdown hose is in use and the pressure drops,

the pump will turn on.

The raw water washdown system is equipped with a sea strainer on the intake side of the pump

located in the bilge behind the stern access hatch. This should be checked frequently and cleaned

as necessary.

The Washdown Pump Connector

The washdown pump hose connector is located in the cockpit and

uses a standard garden hose connection.

ALWAYS TURN THE RAW WATER PUMP SWITCH TO THE “OFF” POSITION WHEN LEAV-

ING THE BOAT UNATTENDED.

DO NOT RUN THE HIGH PRESSURE PUMP DRY FOR EXTENDED PERIODS AS DAMAGE

TO THE PUMP WILL RESULT.

6-2

Washdown Pump

Washdown Hose

Connector

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 139 140

Žádné komentáře

PURSUIT 2870 OFFSHORE Uživatelský manuál Strana 54